Home / Guides
Guides & install help
Short and practical. Written to answer the question you actually typed into Google.
In a hurry? The Mount Finder answers "which mount do I need" in three questions, and compatibility confirms what fits your dish.
Starlink hurricane prep: take it down, or ride it out?
The 170 mph figure belongs to different hardware, the mount has no rating at all, and the fixing is what fails. A decision table for storm week.
Starlink grounding and lightning: what actually applies
A dish on a metal mast is an outdoor antenna. What US code expects of the mast and the lead-in, what your mount does not do, and the questions to ask.
Mounting a Starlink dish on siding: vinyl, aluminum, wood
Siding is a rain screen, not a wall. How to reach the framing behind vinyl, aluminum and wood clapboard, land the plate flat, and seal both holes.
Can Starlink use an old DirecTV or Dish pole?
Old satellite masts are already on half the houses in the country. How to measure yours, what it will actually carry, and why the old spot may fail the sky check.
Starlink on brick, block or stucco: what actually holds the bracket
Brick veneer, hollow block and stucco over foam each take a different anchor. How to tell which wall you have, and what an 11 inch arm demands of it.
Moving house with Starlink: dish, mount, holes
How to take a Starlink dish and mount down before a move, seal the roof holes properly, and decide whether to take the mount or buy a new one for the new house.
Starlink gift guide: what actually gets used
What to buy someone who just got Starlink: the mount gifts that solve a real install problem, the safe picks when you cannot see their setup, and what to skip.
Starlink mount checklist: before you check out
Ten minutes, five gates: what to confirm about your dish model, your site, your permissions and the box before a Starlink mount order goes in — and when to wait.
Starlink mount permits: do you need one?
Most home Starlink installs need no building permit. The gates that actually stop people are HOA rules and landlord clauses. The decision framework, honestly.
Starlink ground mount: ballast, stakes and wind
A ground or yard Starlink mount solves one problem: what stops it tipping. Ballast placement, stakes, frost heave and the seasons, explained honestly.
Starlink in winter: snow load and a clear view
Winter Starlink installs come down to three things: the load snow puts on the mount, height above the drift, and whether you can still reach the dish.
Mounting Starlink at a cabin in the woods
What a cabin install actually demands: clearing tree canopy, choosing permanent over temporary, long cable runs, off-grid power and the seasonal checks.
Starlink on a boat: the mount question, answered honestly
What actually works for mounting Starlink on a boat: why freestanding beats drilling fiberglass, salt-air maintenance, ballast and the cable entry into the cabin.
Starlink installation cost: when DIY beats $150–$300, and when it doesn't
The honest cost breakdown for a Starlink mount install in 2026: the free DIY case, the $150–$300 paid case, and the four scenarios where paying is the cheaper option.
Starlink dish drift: why your pole or pivot slips, and the three fixes that actually work
A Starlink dish that worked last week and drops out today has slipped on the mount, not the satellite. Why pole and pivot mounts drift, the three fixes that work, and what to skip.
Starlink mount install tools checklist
The honest tool list for a Starlink mount install: what you already own, the two things worth buying ahead, and the official adapter you do not need.
Starlink cable routing: length, waterproofing
The Starlink cable is a fixed length with sealed connectors, so the route is planned before the mount goes up. Where to run it, how to seal the entry, and what actually kills cables.
Pole and mast mounts for Starlink: height, guying and wind
A pole mount puts the dish above the tree line. How tall to go, when guying becomes mandatory, and how wind and sway change the install.
Starlink Gen 3 router: where to put it
Router placement decides your Wi-Fi more than the dish does. Where the Gen 3 router should live, why the floor is the worst spot, and how to mount it.
The Starlink pipe adapter: why you may not need to buy one
The Starlink dish uses a 1.5 inch pipe thread, so most mounts take it directly. Here is when you need an adapter, and when you do not.
Starlink tripod stand buyers guide: stability
A Starlink tripod stand wins when you cannot or will not fix anything: renters, campsites, balconies. Here is what to check before you buy.
Wall mounting Starlink: height, reach, geometry
A wall mount gets the dish up without touching the roof. The win is height and a clear view; the trade-off is what the wall will take.
Off-grid Starlink: power, batteries and how long it runs
Starlink is not a light load off-grid — you supply the watts. Size the battery to the hours you need, run it off 12V or a station, and dodge dusk brownouts.
Official vs third-party Starlink mounts
Official vs quality third-party Starlink mounts compete on fit, finish and surface work; the dish side is the same 1.5 inch thread either way.
Cheap vs premium Starlink mounts: where the money goes
Cheap vs premium Starlink mounts are different bets: the money goes into reach, materials and sealing. Spend it where your site is actually difficult.
Best Starlink mounts 2026: which type fits
Roof, wall, pole or freestanding — the four Starlink mount types, what each one is for, and the one fact that decides most buying questions.
Installing Starlink on a roof without leaks
A roof mount gives the highest, shortest-cable Starlink install — but only if the covering takes a hole. Steps, sealing, and when a wall or tripod wins instead.
Starlink RV setup: mounts, power, staying online
RV Starlink setups that actually travel: a tripod you set up in three minutes, a roof mount for full-timers, and why the dish cannot stay up while you drive.
How high should the dish be? Obstruction maths, explained
An obstruction is an angle, not a height. Two worked examples, and why shifting the dish sideways usually beats raising it.
Renting, moving or temporary? Setups you can take with you
If you rent, the cost that decides the mount is removal, not installation. What each type leaves behind at move-out, and what travels to the next address.
Metal roof vs shingle vs flat: which mount actually holds?
Roof material matters less than how the bracket is fixed. A seam you can clamp, a sheet you must screw through, and a flat roof where bolting down is the wrong move.
Wall vs eave: getting a clear view without touching the roof
A wall mount is easier to fix, an eave mount gets higher. Both leave the roof covering alone — and the side of the house decides which one actually works.
Freestanding: when a tripod beats mounting anything
Four situations where a freestanding stand beats a fixed bracket, what it trades away, and the one case where it loses.
How to mount Starlink without drilling (every real option)
Freestanding stand, eave bracket, clamp or ballast — the four ways to get a dish up with zero holes, and what each one actually holds.
Starlink Gen 3 vs Mini: which mount do you actually need?
Same 1.5-inch pipe thread, very different weight. Two decision tables that get you the right bracket the first time.
How to choose the right mount for your dish
Roof, wall, pole or portable — a two-minute decision tree that gets you the right bracket the first time.
Got a question we haven't written about?
Email us. If it's a good one, it usually turns into a guide. We're the people who make the mounts these guides are about — here's why we build them this way.